Genio 1200 EVK
Genio 1200 Evaluation Kit User Guide
2. Power off the EVK, then switch DIP (SW5) to UFS boot: Run "SP Flash Tool", on <Download> tab, choose <Format All +
Download> in combo box, and then press <Download> to flash image to UFS partition.
Figure 2-11 Flash Tool Download Screen
3. After flashing finished, remove the USB Type-C cable and reboot system.
Note: Choose "Format All + Download", if MAC address were set previously, after this action MAC address will be format.
17
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.