Mipi Dsi Interface; Mipi Csi Interface; Ethernet Interface; Table 3-10 Ethernet Led Indicator - MEDIATEK Genio 1200 User Manual

3.10

MIPI DSI Interface

Genio 1200 EVK provides two 4-lane MIPI DSI interface. A Startek LCM (KD070FHFID078-01-C021A) with touch pad is
provided in the box. The I2C capacitive touch controller is Goodix GT9271.
Up to 1.2Gbps for 1-Data Lane
•
Pixel format of RGB565/RGB666 or Loosely RGB666/RGB888
•
Support peripheral TE and external TE signal detection
•
3.11

MIPI CSI Interface

Genio 1200 EVK provides three 4-lane CSI interfaces, the CSI interface operates up to a maximum bit rate of 1.5Gbps per
lane. Camera daughter board are connected through PCIe x1 slot.
Default: CAM0 and CAM2 enable
3.12

Ethernet Interface

Operate with an external Ethernet PHY (Realtek RTL8211F-CG)
•
Dynamically configurable to support 10/100/1000M with RGMII
•
CRC-32 checking with optional forwarding of the FCS field to the user application
•
Optional magic packet detection
•
EEE (Energy Efficient Ethernet) MII signaling according to the IEEE 802.3az specification
•
RJ-45 Ethernet connector with transformer and LEDs in it
•
B
Link
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.

Table 3-10 Ethernet LED Indicator

10M
-
Active
100M
Orange LED Green LED
Yellow LED Flash
Genio 1200 EVK
Genio 1200 Evaluation Kit User Guide
1G
25