Genio 1200 EVK
Genio 1200 Evaluation Kit Quick Start Guide
5
MIPI DSI Panel FPC and Touch Cable Connection
Install procedure:
• Step 1
Insert the MIPI DSI panel FPC into Genio 1200 EVK LCM0 connector. After cable inserted, the FPC connector must be
pressed down firmly.
Figure 5-1 Connect the MIPI DSI Panel FPC
• Step 2
Loosen the Genio 1200 EVK CPT0 connector head, insert the touch cable into CPT0 connector. After cable insert, press
tightly the connector head.
-
Figure 5-2 Connect the Touch Cable
9
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.