Lcm Fpc Installation; How To Power Up The System; How To Flash Image To The Board - MEDIATEK Genio 350 Hardware User's Manual

LCM FPC Installation

3.17
Please connect LCM FPC in this way.
3.18

How to Power Up The System

You may power on Genio 350-EVK by following steps.
1. Connect UART0 to the computer via an USB cable. (If you want to see the logs.)
2. Plug in the DC 12V power cord.
3. You will see the boot-up picture on LCD display, or some trace logs come out from UART0.

How to flash Image to the Board

3.19
1. Download prebuilt board image:
https://mediatek.gitlab.io/aiot/doc/aiot-dev-guide/sw/yocto/download.html#prebuilt-board-images
2. How to reflash image, please see the documentation from website:
https://mediatek.gitlab.io/aiot/doc/aiot-dev-guide/sw/yocto/get-started/flash/flash-Genio 350-evk.html
MediaTek Proprietary and
Confidential
Figure 3-8 LCM FPC Installation
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document, in whole or in
part, is strictly prohibited.
Genio 350 Evaluation Kit Hardware User Guide
Genio 350 EVK
Unclassified
Page 19 of 24