Runco Reflection CL-810 CineWide Owner's Operating Manual page 79

Table 5-1. Troubleshooting Chart (continued)
Symptom
TEMP and LAMP LEDs are
both flashing red.
LAMP LED lights solid red.
TEMP LED lights solid red.
Runco CL-810 Series Owner's Operating Manual
Possible Cause(s)
• The lamp cover is open.
• Fans are not working
properly.
• The lamp has failed or
exceeded its usage life.
• CL-810 internal
temperature is too high.
Solution
• Close the lamp cover.
• Please contact your Runco
dealer for assistance.
• Replace the lamp with a
new one.
• Power off the CL-810 and
allow it to cool down.
Ensure that the intake and
exhaust vents are not
blocked. Turn the
projector back on. If the
problem persists, please
contact your Runco dealer
for assistance.
67
Maintenance and Troubleshooting