Rs-232 Controller Connection - Runco Reflection CL-810 CineWide Owner's Operating Manual

Installation
RS-232 Controller
Connection
➤
Connect a PC or home theater control/automation system (if present) to the RS-232 port
on the CL-810; see Figure 3-14. Use a standard, 4-wire RJ-11 telephone cable, wired
straight-through.
For more information about using this connection, refer to Serial Communications on
page 69.
1
2
3
4
Red
D-Sub 9-pin female
2
3
5
1, 4, 6, 7, 8, 9
Figure 3-14. RS-232 Control System Connection
S-VID
S-VID /
RJ-11 Male
Yellow
Green
Black
RS-232 Adapter Wiring
4-pin RJ-11
2
3
1, 4
--
30
RJ-11 to
D-Sub 9-pin Adapter
(not included)
Yellow
Green
Black
Red
Function
Transmit Data
Receive Data
Ground
Not Connected
Runco CL-810 Series Owner's Operating Manual
5 4 3 2 1
9 8 7 6
D-Sub 9-pin female