Table of Contents
Advertisement
A Series Inverter Modular Air-cooled Chiller (Heat Pump)
Please do lifting as shown in the figure below for units with similar structure.
(1) LSQWRF35VM/NhA-M, LSQWRF60VM/NhA-M
(2) LSQWRF130VM/NhA-M
The length of the spreader
should be larger than that
of the unit.
4.4 Installation foundation and service space
(1) Installation foundation shall be designed by the qualified designer in accordance with the actual
condition.
(2) A rubber pad shall be placed under the base of each single unit and then secured on the ground or
the roof. Alternatively, each single unit can be placed side by side on the parallel channel steel with
enough strength which then shall be secured with anchor bolts. Distance between each single unit
shall be keep 0.5m as a minimal.
Dursing hoisting, the length of
the spreader should be longer
than that of the unit.
During transport by the forklift ,the symmetric holes should
be used at the A-A or B-B base of the unit itself, or at the
wooden base.
13
Soft protector
Advertisement
Table of Contents
