Table of Contents
Advertisement
A Series Inverter Modular Air-cooled Chiller (Heat Pump)
WARNING: If not abide strictly, it may cause severe damage to the unit or the people.
NOTE: If not abide strictly, it may cause slight or medium damage to the unit or the people.
This sign indicates that the operation must be prohibited. Improper operation may cause severe
damage or death to people.
This sign indicates that the items must be observed. Improper operation may cause damage to
people or property.
Appliance filled with flammable gas R32.
Before use the appliance, read the owner's manual first.
Before install the appliance, read the installation manual first.
Before repair the appliance, read the service manual first.
• Appliance filled with flammable gas R32. For repairs, strictly follow manufacturer's instructions only. Be
aware that refrigerants not contain odour. Read specialist's manual.
• Do not use means to accelerate the defrosting process or to clean, other than those recommended
by the manufacturer. Should repair be necessary, contact your nearest authorized service centre. Any
repairs carried out by unqualified personnel may be dangerous. The appliance shall be stored in a room
without continuous operating ignition sources. (For example: open flames, an operating gas appliance or
an operating electric heater.) Do not pierce or burn.
• Do not install the unit indoors but outdoors with adequate ventilation.
• If a stationary appliance is not fitted with a supply cord and a plug, or with other means for disconnection
from the supply mains having a contact separation in all poles that provides full disconnection under
overvoltage category III conditions, the instructions shall state that means for disconnection must be
incorporated in the fixed wiring in accordance with the wiring rules.
• The appliance shall be stored in a room without continuously operating open flames (for example an
operating gas appliance) and ignition sources (such as an operating electric heater).
• The appliance shall be stored so as to prevent mechanical damage from occurring. Do not weld or cut
any pipe, evaporator or condenser etc. when there is refrigerant inside the unit.
• Compliance with national gas regulations shall be observed. Only qualified electricians are allowed to
operate the high-voltage devices.
• Keep ventilation openings clear of obstruction.
• Any person who is involved with working on or breaking into a refrigerant circuit should hold a current
valid certificate from an industry-accredited assessment authority, which authorises their competence to
handle refrigerants safely in accordance with an industry recognised assessment specification.
• Servicing shall only be performed as recommended by the equipment manufacturer. Maintenance and
repair requiring the assistance of other skilled personnel shall be carried out under the supervision of
the person competent in the use of flammable refrigerants.
Safety notices (Please be sure to abide)
WARNING
1
Advertisement
Table of Contents
