Table of Contents
Advertisement
A Series Inverter Modular Air-cooled Chiller (Heat Pump)
• Do not install the unit where there is high-intensity magnetic field or it is highly basic or acid or the voltage
is quietly unstable.
• Do not install the unit where there would be leaked inflammable gas, as it would lead to fire hazards.
• The outer casing of the unit should be grounded. Do not connect the grounding line to the gas line,
water line, lightning rod or communication line, otherwise it would lead to electric shocks.
• The appliance shall be installed in accordance with national wiring regulations, the appliance shall be
disconnected from its power source during service and when replacing parts.
• Do not stand on the unit or place other object on it.
• Do not insert fingers or other objects into the outlet grill to prevent damage to the unit or personal injury or
death.
• Do not start or stop the unit by inserting or drawing out the power plug.
• Do not let children play with this unit.
• The unit should be equipped with the leakage protector which should be installed in accordance with
electric technical standards. Uninstallation or incorrect installation would lead to electrocution. Do
electric leakage detection after electric installation is finished.
• Volatile liquid like thinner or gasoline would damage appearance of the unit. (Only clean the outer
casing with of the unit with soft dry cloth or wet cloth with neutral detergent.
• Do not install the unit where conditions are severe, where it is close to the hot spring, coast or oil field,
as it would lead to corrosion, electrocution or fire hazards. Besides, do not install the unit where there
are corrosive, inflammable substances or smog, otherwise it would lead to normal operation failure,
shortened service life, fire hazard, or severe injury.
• Do not start the compressor by manually closing the AC contactor, otherwise it would lead to
electrocution or fire hazard.
• Do not misuse refrigerant, as it would lead to normal operation failure, unsatisfactory performance, fire
hazards or even explosion etc.
• Installation should be done in accordance with this manual. Please read it manually prior to startup or
troubleshooting.
• Installation should be done by qualified servicemen, as incorrect installation would lead to water
leakage, electrocution or fire hazards etc.
• Before installation, check for all power supplies with the nameplate and check for its safety.
• The unit should be grounded and there should be specialized grounding line for the power socket to
avoid of electrocution. Do not connect the groundling line to the gas tank, water line, lightning rod, or
telephone line.
• Only specialized accessories and parts are allowed for installation, otherwise it would lead to water
leakage, electrocution or fire hazards etc.
• Size of the power lines should be large enough. Only specialized power lines are allowed for replacing
the damaged ones.
• When power lines have been connected, install the electric box as well to avoid of any safety problems.
• After all installation has been finished, take an overall check to the unit before powering it on.
NOTE
DANGER
！
CAUTION
3
Advertisement
Table of Contents
