Advertisement
1 Short description
Stainless steel IP68 (acc. to EN 60529) compression / tension load cell
Force measuring compatible
RoHS conform
Suitable for vehicle and hopper scales and vehicle testing facilities, test stands
Accuracy OIML R60 C2
2 Available models
Capacity
10t((≈100kN)
20t (≈200kN)
30t (≈300kN)
40t (≈400kN)
50t (≈500kN)
100t (≈1000kN) CD 100-2P2
3 Introduction
Please pay attention to the notes of the operating manual: read these operating
manual carefully before commissioning, even if you already have experience with
SAUTER measuring cells.
After receiving the measuring cell, it should be checked in advance whether no
transport damage has occurred, whether the outer packaging or other parts or even
the article itself has been damaged. If any damage is evident, please inform
SAUTER GmbH immediately.
4 Warning notes
Observe the national accident prevention regulations.
Not correct executed use of the measuring cell can lead to serious injuries, death,
material damage and personal injuries. Use only by trained and experienced people.
Never load more than the max. capacity to a measuring cell. Overloaded measuring
cells no longer have the required accuracy. Overloaded or deformed measuring cells
are no longer allowed to use and must be changed quickly.
Never step under suspended loads.
Always fasten overload- or break security to your construction.
Pay attention to the allowed static and dynamic loads of the used equipment.
Let the measuring cells calibrate at regular intervals.
Only load the measuring cell in its specified load direction. Avoid lateral forces.
Control the measuring cells to deformations and cracks.
Measuring cells with 4-Conductor cable will change their characteristic value when
shortened or extended the cable length.
5 Warranty
The warranty expires at:
Disregard of the specifications of the operating manual
Modification or opening the measuring cell
Overload
CD P2-BA-e-1810
Model
CD 10-2P2
CD 20-2P2
CD 30-2P2
CD 40-2P2
CD 50-2P2
3
Advertisement
