Advertisement
1 Short description
Stainless steel IP68 (acc. To EN 60529) compression load cell with low
profile
Suitable for mass and force Measuring
RoHS conform
Suitable for vehicle and hopper scales and vehicle testing facilities, test
stands, etc.
Built in surge arrestors
Accuracy C3 OIML R60
2 Available models
Capacity
60kg (≈600N)
130kg (≈1,3kN)
250kg (≈2,5kN)
500kg (≈5kN)
1000kg (≈10kN)
2000kg (≈20kN)
3 Introduction
Please pay attention to the notes of the operating manual: read these operating
manual carefully before commissioning, even if you already have experience with
SAUTER measuring cells.
After receiving the measuring cell, it should be checked in advance whether no
transport damage has occurred, whether the outer packaging or other parts or
even the article itself has been damaged. If any damage is evident, please inform
SAUTER GmbH immediately.
4 Warning notes
Observe the national accident prevention regulations.
Not correct executed use of the measuring cell can lead to serious injuries, death,
material damage and personal injuries. Use only by trained and experienced
people.
Never load more than the max. capacity to a measuring cell. Overloaded
measuring cells no longer have the required accuracy. Overloaded or deformed
measuring cells are no longer allowed to use and must be changed quickly.
Never step under suspended loads.
Always fasten overload- or break security to your construction.
Pay attention to the allowed static and dynamic loads of the used equipment.
Let the measuring cells calibrate at regular intervals.
Only load the measuring cell in its specified load direction. Avoid lateral forces.
Control the measuring cells to deformations and cracks.
Measuring cells with 4-Conductor cable will change their characteristic value
when shortened or extended the cable length.
CR P1-BA-e-1910.docx
Model
CR 60-3P1
CR 130-3P1
CR 250-3P1
CR 500-3P1
CR 1000-3P1
CR 2000-3P1
3
Advertisement
