Schartec Prime 600 Installation And Operating Instructions Manual page 5

Hide thumbs Also See for Prime 600:
Table of Contents

Advertisement

Risk of injury during door movement
While the door is moving, the risk of injury to persons or damage to objects is increased while standing in the movement area of
the door. Keep door opener system and remote controls out of reach of children. Ensure that when the door is moving that no
persons or objects are located within the door movement area. Only use the garage door opener when you have view of the
garage door itself and can monitor its movement. Monitor the door travel until the door has reached the end position. Drive or
pass through the garage door entryway ONLY when the door has come to a standstill! Never stand directly under the open door.
Proper Use
Demonstrate to all persons using the door opener system the proper and safe operation of the garage door opener. Demonstrate
and test the mechanical release as well as the safety return.
6. Precautions for the use of the remote control
WARNING!
Risk of injury from unwanted or accidental door movement
Accidental pressing of a button on the remote control can lead to unwanted door movements and lead to accidental injury. Make
sure that remote controls are not accessible to children and are only used by persons who have been instructed in the operation
of the remote-controlled garage door opener system! Only use the remote when you are in visual contact with the door unless a
safety device is connected (e.g. photocell). Drive or pass through the garage door entryway ONLY when the door has come to a
standstill! Never stand directly under the open door. Note that the accidentally pressing a key on the remote (for example in your
pocket / handbag) may lead to an unwanted door travel.
7. Safety Installations
Safety-related functions and components such as automatic power shutdown and the use of external photocells have been
tested and meet the requirements of EN 12453 and EN 12445 standards.
WARNING!
Risk of injury from malfunctioning safety devices
To test the safety reverse, hold the door as it closes with both hands. The garage door opener system must stop and initiate the
safety reverse. Test this also as the garage door opens. The door system must switch off and stop the door movement. Upon
failure of the security reverse, directly entrust an expert with the inspection or repair.
8. Inspection and maintenance
The garage door opener is maintenance-free. According to the manufacturer and for your own safety, we recommend that you
allow the garage door opener system to be inspected by an expert. A check or a necessary repair should only be performed by a
specialist. Please also contact your supplier. A visual inspection may be carried out by the user. Check all safety and security
features on a monthly basis. Existing errors or defects must be rectified immediately. Inspect the tension of toothed belt every six
months and adjust accordingly if necessary. During the opening and closing phase, the belt may loll briefly because of rail
profile. However, this effect does not have any technical losses and also does not adversely affect the function and life of the
belt.
36

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prime 1000Prime 1200Prime 600-speedPrime 1000-speed

Table of Contents