Table of Contents
Advertisement
All remote buttons control opener
Coded remote button controls opener
Increase quantity
Decrease quantity
9. Remote Control Button Function
a) Press and hold the SET Button until "1" appears on the display, then
release the button.
b) Press the UP button until "9" shows on the display.
c) Press SET to enter this setting sub-menu. You're now in the remote
control button function setting adjustment mode. A "1" will be shown
on the display.
d) Press the UP or DOWN button to select a value between "0" and "1".
"0" means that all 3 buttons on the remote that are coded into
the opener can control the opening and closing of the opener.
This is suited for owners that have only 1 garage door opener.
"1" means that only each button on the remote that is coded
into the opener can open and close the opener. This is suited
for owners that have more than 1 opener and would like to use
1 remote to control more than 1 opener. This is also the
factory setting.
e) Press SET to confirm your selection. The display will return to "I I".
NOTE: Upon activating the Partial Opening / Ventilation
function, the "0" setting is automatically deactivated and reset
to "1".
A. Remote Control Codes Storage Quantity
a) Press and hold the SET Button until "1" appears on the display, then
release the button.
b) Press the UP button until "A" shows on the display.
c) Press SET to enter this setting sub-menu. You're now in the remote
quantity setting adjustment mode. An "A" will be shown on the
display.
d) Press the UP or DOWN button to increase or decrease the number of
remotes that can be stored to the opener. The setting can be set
between "A" and "9" on the display. "A" is the factory setting which
means the opener can store the maximum number of remotes, which
is 50.
Each number between 1 and 9 means the number shown of
the display x 5 = the number of remotes able to be stored to
the opener. E.g. if the display shows "5", then 5 x 5 = 25
separate remote control codes can be stored to the opener.
e) Press SET to confirm your selection. The display will return to "I I".
51
Advertisement
Table of Contents
