Schartec Move 600 Installation And Operating Instructions Manual
Hide thumbs
Also See for Move 600:
- Installation and operating instructions manual (46 pages) ,
- Installation and operating instructions manual (49 pages)
Subscribe to Our Youtube Channel
Related Manuals for Schartec Move 600
Summary of Contents for Schartec Move 600
- Page 1 English Installation and operating instructions Move 600 600N Move 600-Speed 600N Move 1000 1000N Move 1000-Speed 1000N Move 1200 1200N...
-
Page 2: Table Of Contents
WARNING Please read the manual carefully before you begin the installation and use of the opener. The installation of your new garage door opener must be performed by a competent expert or a specialist company. A competent person is, in accordance with EN 12635, considered a person who has appropriate training, qualified knowledge and practical experience in order to mount and maintain a door system properly and safely. -
Page 3: Important Safety Instructions
Thank you for choosing a quality product from Schartec. Thanks to our unique quality management system, we continuously ensure that all Schartec openers meet the highest standards of quality and comfort. Thank you for your confidence in purchasing our product and we hope you enjoy your new Schartec garage door opener! Declaration of Conformity (CE) Schartec Move series garage door openers meet the requirements of the applicable European and national guidelines. - Page 4 WARNING! Non-suitable fastening materials Use of unsuitable fixing materials can result in the opener not being securely attached and can become loosened. The supplied mounting materials must be checked for their suitability for the intended installation location by the installer. Fatal injury from hand rope A guided type hand rope (pull cord) may lead to strangulation.
- Page 5 Risk of injury during door movement While the door is moving, the risk of injury to persons or damage to objects is increased while standing in the movement area of the door. Keep door opener system and remote controls out of reach of children. Ensure that when the door is moving that no persons or objects are located within the door movement area.
-
Page 6: Warranty Conditions
Warranty Conditions Warranty We are exempt from the warranty and product liability if the opener has been modified without our prior consent or improper installations are performed or initiated against our assembly instructions. Furthermore, we assume no responsibility for the inadvertent or negligent operation of the opener, as well as for the improper maintenance of the opener and accessories, nor for the improper maintenance of the door and its counterbalance mechanism. -
Page 7: Product Description & Features
10. Transmitter technology With Rolling-Code technology (7.38 x 1019 Combinations) and 433.92 MHz frequency, the 4 channel remote control design ensures that you can control 4 different Schartec Move motors with one remote. 11. Lower headroom With as little as 30mm required between the ceiling and the highest point of the door travel, the opener can be flush mounted for low headroom applications. -
Page 8: Pre-Installation Recommendations
Pre-Installation Recommendations 1. Check the garage door and garage door system DANGER! Balancing springs are under high tension. The readjustment or loosening of the balancing springs can cause serious injuries! For your own safety, necessary maintenance and repair work of the balancing springs should only be performed by an expert. Never attempt to replace, readjust, repair, or move the balancing springs for the counterbalancing of the door or their holders. -
Page 9: Package Contents
Package Contents *Mounting screws and Anchors for the Door and Wall brackets are not included in the package.*... -
Page 10: Installation Instructions
Installation Instructions Check out our assembly video by scanning this QR code with your smartphone! or visit www.schartec.de/en/ Boom Rail Assembly 2 Part Boom Rail A:1500 mm B:1500 mm Sleeve Figure 2 3 Part Boom Rail D:1000 mm C:1000 mm... - Page 11 Figure 4 2. Remove the bolt, washer, and spring; pull the screw rod along with the belt to the end rail position (Figure 4). Figure 5 Figure 6 3. Put the rod through the hole and run the spring, washer, and nut on the threaded rod as shown in Figure 5.
-
Page 12: Installing The Boom Rail And Opener
Installing the boom rail and opener Figure 8 STEP 1 (Figure 8) Attach the opener to the boom rail using the motor shaft sleeve (A). Secure the rail to the opener with the 2 “U” brackets and the 6 mm nuts (F) supplied. - Page 13 Figure 12 Figure 13 STEP 5 (Figure 12 and 13) With the boom rail securely positioned on your ladder, attach the Easy-Click bracket to the ceiling mounted extension pieces with the nuts and bolts (E) provided. *Mounting screws and Anchors for the ceiling hangers are not included in the package.* Figure 14 STEP 6 (Figure 14) Slide the trolley towards the closed garage door.
-
Page 14: Programming Instructions
Programming Instructions Programming Opening and Closing Limits a) Press and hold SET button until 1 appears on the display, then release the button. The opener is now in Programming Mode. b) Press and hold the UP button until the door reaches the desired open position. - Page 15 4. Obstruction Force Adjustment (Menu option 3 in display CAUTION: the obstruction force adjustment is set automatically during programming. Normally, no adjustment is necessary. The factory-set forces (value 3) are designed to provide a smooth operation of the opener with standard garage doors; the factory setting forces should, in principle, be sufficient to fully open and close the garage door.
- Page 16 5. Automatic Closing Increase A/C time NOTE: A photocell (safety-light beam) must be connected in order to use the automatic closing function. a) Press and hold the UP button until a horizontal bar is indicated on the display. Now press UP button once to set the auto-close time (in minutes).
-
Page 17: External Control And Accessories Connections
External control and accessories connections The O/S/C connection – Figure 15 Add a new O/S/C button to open or close the door (e.g. key-switch or interior push-buttons). The Photocell connection – Figure 16 Connecting a photocell increases the safety surrounding your garage door mechanism. Flashing light function –... -
Page 18: Manual Disengagement
Manual Disengagement Attach warning label Attach the warning about the risk of entrapment in a permanently prominent, clean place. For example, near the permanently installed buttons used to open and close the garage door opener. The opener is equipped with a manual release cord to disengage the trolley and enable moving the door by hand while holding the handle down (Figure 19). -
Page 19: Technical Specifications
Technical Specifications Move 600 Move 1000 Move 1200 220 - 240V, 50–60 Hz Input voltage Max. pull force 600 N 1000 N 1200 N Max. door area m² m² m² 10.0 15.0 18.0 Max. door weight (Balanced) 80 kg 100 kg 140kg Max. - Page 20 Move 1000-Speed Move 600-Speed 220 - 240V, 50–60 Hz Input voltage Max. pull force 600 N 1000 N Max. door area m² 10.0 m² 15.0 Max. door weight (Balanced) 80 kg 100 kg Max. door height 2400 - 3500 mm...
-
Page 21: Parts Listing
Parts Listing Item Description Item Description Item Description U Hanging Bracket Control Panel Cover Trolley Easy-Click Bracket Release Cord Opener Middle Cover Mounting Bracket LED light Cover Caution Card Chain or Belt Release Handle PCB (1) Idler Pulley Remote Control PCB (2) Wheel Bracket Remote Control Holder... -
Page 22: Common Faults & Solutions
Common Faults & Solutions Fault appearance Fault cause Solutions Nothing working on opener 1. Power supply 1. Check whether the electrical socket is has power LCD screen not very bright 2. Plug wire is loose 2. Check if the external Fuse is broken ※... - Page 23 3. Interference between remote/receiver 3. Remove interference Cannot code in new remotes New remote control is not compatible Use only remote controls approved by Schartec with opener Cannot code in new remotes Stored remote code is full Delete all stored codes -- See Programming Instructions.
-
Page 24: Instructions For Shortening The Boom Rail
Instructions for shortening the Boom Rail Figure 1 Figure 2 Figure 3 Step 1: Remove the rail end. (Figure 1) Step 2: Remove the rail head. (Chain - Figure 2, Belt - Figure 3) Figure 5 Figure 4 Step 3: Cut the rail from the head side to the desired length. (Chain - Figure 4, Belt - Figure 5) Remark: Cut L1 to a max.
Need help?
Do you have a question about the Move 600 and is the answer not in the manual?
Questions and answers