Connection/Installation; Preparing The App And The Batteries; Mounting The Rtk Kit On The Aircraft And Assembling The Aircraft - Sony Airpeak RTK-1 Operating Instructions Manual

Connection/Installation

Preparing the app and the batteries

When you use the ARS-S1 for the first time, refer to the Startup Guide included with the ARS-S1
and follow the steps below.
"Mobile app 'Airpeak Flight' installation/initial setup" chapter
• "Installing the 'Airpeak Flight' app"
• "Signing in to the 'Airpeak Flight' app"
"Setup" chapter
• "Charging the batteries"
Mounting the RTK kit on the aircraft and assembling
the aircraft
[1] Removing the damping plate from the aircraft
Be sure to turn off the aircraft before connecting/removing cables or the connection hub to/from
the aircraft.
1
When using the aircraft with the damping plate already attached,
remove the battery pack, propellers, and landing gear from the
aircraft.
Refer to the ARS-S1 Startup Guide for how to remove each part.
To remove the landing gear, perform the work with the aircraft placed upside down on the
packing box cushioning.
Top cushioning
Note
When placing the aircraft upside down, be careful to keep the propeller attachment points of each motor off
the surface.
11