Preparing The Remote Controller And The Aircraft; Preparing A Camera - Sony Airpeak RTK-1 Operating Instructions Manual

Preparing the remote controller and the aircraft

When you use the ARS-S1 for the first time, refer to the Startup Guide included with the ARS-S1
and follow the steps below.
"Setup" chapter
• "Attaching a mobile device to the remote controller"
• "Loading battery packs in the aircraft"
• "Linking/setting up the remote controller and aircraft"

Preparing a camera

Prepare the camera before mounting it on the gimbal. (Both the camera and gimbal are sold
separately.)
[1] Inserting a battery pack and memory card
Insert a battery pack and memory card in the camera in advance. (ILCE-7RM5 is used in this
example.)
Battery pack
Notes
• During flights, cameras consume battery power as you shoot. Always charge the camera battery sufficiently
before mounting on the gimbal.
• Use memory cards with sufficient free space for recording images.
• Make sure that the camera's battery cover is securely closed and locked.
Memory card
31