Mounting A Camera On The Gimbal (When Using The Gbl-T3) - Sony Airpeak RTK-1 Operating Instructions Manual

Mounting a camera on the gimbal
(when using the GBL-T3)
The installation procedure differs depending on the gimbal. Mount the camera on the gimbal
according to the instructions for your gimbal.
[1] Attaching the camera plate and hot shoe cable to the camera
The camera plate is included in the gimbal GBL-T3 set (sold separately). Use the hot shoe cable
included with this product.
1
Attach the camera plate included with the gimbal set to the camera.
Attach the camera plate (included with the GBL-T3) to the tripod socket on the bottom of the
camera. Temporarily attach the thumbscrew to the tripod socket by tightening it.
2
Use a coin, etc. to fully tighten the thumbscrew.
Tripod socket Camera plate
Thumbscrew
43