Sony Airpeak RTK-1 Operating Instructions Manual page 18

Bottom of aircraft
 Connect the antenna cables to the ANT L/R ports.
Notes
• Connect the cables before attaching the damping plate, as it will be difficult to insert the cables once the
damping plate is attached.
• The antenna cables on the right and left are the same part. Do not route the antenna cables with them
crossed.
• Connect the USB Type-C® cable (aircraft — gimbal) to the USB port. Connecting the cable to the EXT port will
not work.
• Use the USB Type-C® cable (aircraft — gimbal) that is included with the aircraft.
• A locking mechanism is used on the control cable (aircraft — gimbal), power cable (aircraft — gimbal), and
antenna cable. Insert fully until the plug locks into place.
• The antenna cables have a braided tube. Be careful not to mistake them with the control cable (aircraft-
gimbal).
18