Sony Airpeak RTK-1 Operating Instructions Manual page 32

[2] Configuring required settings on the camera
Configure the following setting items on the camera. For setting instructions, refer to the camera
operating instructions or online Help Guide (Web manual).
• [PC Remote Function] — [PC Remote]: [On]
• [PC Remote Function] — [Still Img. Save Dest.]:
– [PC+Camera]: Captured still images are saved to the camera, and the geotags of the captured
still images are stored on the SD memory card inserted into the RTK interface unit and in
Airpeak Base. The thumbnail functions for captured still images are available in the "Airpeak
Flight" App.
– [Camera Only]: Captured still images are saved only to the camera. The geotags of the
captured still images are not stored on the SD memory card inserted into the RTK interface
unit or in Airpeak Base. The thumbnail functions for captured still images are not available in
the "Airpeak Flight" App.
• [Ctrl w/ Smartphone] — [Ctrl w/ Smartphone]: [Off]
• [USB Power Supply]: [Off]
• [File Format]: [RAW+JPEG] or [JPEG]
• [Shutter Type]:
– [Mechanical Shutter]: The geotags of the captured still images are stored on the SD memory
card inserted into the RTK interface unit and in Airpeak Base.
– [Electronic Shutter]: The geotags of the captured still images are not stored on the SD
memory card inserted into the RTK interface unit or in Airpeak Base.
Note
Be sure to set the Bluetooth function of the camera to [Off]. If it is set to [On], it may affect the wireless
transmission function.
¼
Hint
When the camera is attached to the gimbal and operated, the eye sensor of the camera may react, and the
monitor may turn off/on. You can keep the monitor off or on at all times by selecting a setting other than [Auto]
for [Select Finder/Monitor] on the camera.
32