Sony Airpeak RTK-1 Operating Instructions Manual page 28

2
Connect the micro USB OTG cable to the micro USB port (USB-B) of the
remote controller.
Micro USB port
(USB-B)
3
Peel the release paper off the fixing sheet attached to the micro USB
OTG cable, and stick the fixing sheet on the back of the remote
controller.
Before doing so, wipe any dust or debris off the area where the fixing sheet is to be stuck
using a soft, dry cloth. Then, align the edge of the fixing sheet with the part separation line
on the remote controller and attach the fixing sheet securely.
Wipe off any dust or debris.
Notes
• Be sure to attach the fixing sheet to ensure stable communication between the antenna unit for base station
and the remote controller.
• Do not detach the micro USB OTG cable once it is attached.
• Once the fixing sheet peels off, it cannot be reused because it loses its adhesive strength. If you need to
replace the fixing sheet, such as in cases where the fixing sheet has peeled off, please refer to "If the fixing
sheet becomes detached from the remote controller" (page 55).
28
Part separation line