Sony Airpeak RTK-1 Operating Instructions Manual page 30

5
Connect the micro USB OTG cable and the USB Type-C® cable (remote
controller-base station).
Notes
• When connecting the USB Type-C® cable (remote controller-base station) to the remote controller, be sure to
connect to the micro USB port (USB-B) of the remote controller via the micro USB OTG cable. Do not connect
directly to the USB port (USB-A) of the remote controller.
• Be careful not to pull on the USB Type-C® cable (remote controller-base station) or catch it with your feet.
The tripod on which the antenna unit for base station is installed may topple and come into contact with
surrounding persons or items, or the cable may become disconnected, stopping transmission of correction
data to the aircraft and affecting the flight of the aircraft.
¼
Hint
When using in dual operation mode, the remote controller to be connected to the antenna unit for base station
can be selected from [Main] or [Sub] by the "Airpeak Flight" app configuration.
30
Micro USB OTG cable
USB Type-C® cable
(remote controller-base station)