Sony Airpeak RTK-1 Operating Instructions Manual page 14

[2] Removing the connection hub from the aircraft
1
Remove the cables from the aircraft.
Remove the cables from the connection hub on the aircraft.
 Control cable
(aircraft — gimbal)
Front of aircraft
 Remove the control cable (aircraft — gimbal) from the control port.
Rear of aircraft
 Remove the power cable (aircraft — gimbal) from the POWER port.
 Remove the USB Type-C® cable (aircraft — gimbal) from the USB port. If the USB Type-C®
cable (aircraft — gimbal) is connected to the EXT port, remove the cable from the EXT
port.
14

 USB Type-C® cable
(aircraft — gimbal)
 Power cable
(aircraft — gimbal)

