STEINEL GluePRO 300 Manual page 13

Explanations of the technical specifications on page 3
L × W × H Dimensions
U Rated voltage in volts
T Temperature in °Celsius
m/t* Delivery rate per hour in kg
* Depending on temperature and glue viscosity
Accessories
Your retailer keeps a stock of accessory nozzles.
Nozzles
1. Long nozzle, 3 mm
Prod. No. 052737
2. Long nozzle, fine, 1.5 mm
Prod. No. 052928
3. Long nozzle, large, 4.5 mm
Prod. No. 052935
GlueMatic 7011 status indicators and error messages
Heating
Display
element
"- - -"
"Err" Warm
"Err" Cold
GluePRO 300 fault indication
The LED on the GluePRO 300 flashes rapidly to indi-
cate that a fault has occurred.
Cause
LOC function activated
Maximum temperature
exceeded
Sensor short circuit
or sensor break
- 13 -
P Maximum output in watts
max
P ** Rated input power in watts
Ø
t Heat-up time in minutes
190
m Weight without power cord in grams
** For 30 s of gluing / 60 s pause
Glue sticks
1. General-purpose glue sticks, 300 mm, 600 g
Prod. No. 050092
2. Acrylate glue sticks, 300 mm, 600 g
Prod. No. 052416
3. Fast glue sticks, 300 mm, 600 g
Prod. No. 052430
4. Flex glue sticks, 300 mm, 600 g
Prod. No. 052423
5. Low Melt glue sticks, 300 mm, 600 g
Prod. No. 052409
6. MR Polyurethan (PUR) glue sticks 250, mm 200 g
Art.-Nr. 087388
Note:
Refer to data sheet with information on applying the
hot-melt adhesive. Data sheets and further information
are available at www.steinel-professional.de.
Remedy
Deactivate LOC function.
(See "Other functions of GlueMatic 7011")
Let tool cool down.
Switch tool OFF and ON.
Replace heating chamber.
Please contact your service partner.
If the fault is indicated for more than 5 minutes,
please contact your service partner.
GB