Pinch Roller Replacement; Media Holder Replacement - MIMAKI UJV100-160 Care And Maintenance

Pinch Roller Replacement

Replace worn or dirty pinch rollers with new ones.
• Turn off the main power and unplug the power cable before replacement.
1
Open the front cover.
2
Raise the clamp lever.
3
Remove the O-ring retaining the pinch rollers.
• The pinch rollers are small. Be careful to avoid dropping them into the product interior.
4
Remove the pinch rollers.
5
Mount new pinch rollers, and secure them using the O-ring.
6
Close the front cover.

Media Holder Replacement

If the media holder becomes deformed and touches the carriage or print head, replace with a new media
holder.
• Turn off the main power and unplug the power cable before replacement.
O-ring
Pinch roller
25
3. Consumable Item Replacement