MIMAKI UJV100-160 Care And Maintenance page 23

5
Remove the cap absorber.
• Push up the two tabs at the front to remove the cap absorber.
• Avoid ink dripping when removing the cap absorber.
6
Clean the carriage base.
7
Mount a new cap absorber.
• Push the tabs on the cap absorber into the slits at the rear of the C slider, and clip in the tabs at
the front.
Claw
8
Once replacement is complete, move the wiper back to the rear by hand.
9
Close the front cover, then turn on the power.
• Check to confirm that the carriage returns to the station.
Cap absorber
Cap base
Cap absorber
23
3. Consumable Item Replacement
Push in to engage tabs.