21.2
Preparing for use after storage
–
Store the vehicle in a dry location that is not subject to large
fluctuations in temperature.
–
Cover the motorcycle with a tarp or cover that is permeable to
air.
Info
Do not use non-porous materials since they prevent
humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since
the engine cannot warm up properly, the water vapor
produced during combustion condenses and causes
valves and the exhaust system to rust.
–
Take the motorcycle off the front lifting gear. (
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 188)
–
Install the 12-V battery.
–
Set the time and date.
–
Perform checks and maintenance measures when preparing for
use. (
p. 144)
–
Take a test ride.
401059-01
p. 190)
(
p. 291)
STORAGE 21
335