13 SERVICE WORK ON THE CHASSIS
202
–
Check the chain sliding guard for wear.
»
If continuous signs of wear to the chain are visible on the
chain sliding guard in the area
–
Change the chain sliding guard.
»
If the chain sliding guard is highly worn on the underside
in the marked area
–
Change the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
»
If the chain sliding guard is loose:
–
Tighten screws on the chain sliding guard.
Guideline
Remaining screws,
chassis
V01265-10
Finishing work
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 188)
D
marked:
E
:
M5
5 Nm (3.7 lbf ft)