13.24
Removing fork protector
13.25
Installing the fork protector
–
Remove screws
–
Remove screw
–
Take off the fork protector at the front.
–
Repeat these steps on the opposite side.
F02051-10
–
Position the fork protector. Mount screw
tighten yet.
Guideline
Screw, fork protector
–
Mount screws
Guideline
Screw, fork protector
The fork protector is evenly aligned to the front.
F02051-11
–
Tighten all screws of the fork protector.
SERVICE WORK ON THE CHASSIS 13
1
.
2
.
1
M5x12
5 Nm (3.7 lbf ft)
2
, but do not tighten yet.
M5x17
5 Nm (3.7 lbf ft)
, but do not
221