Table Of Contents - Danfoss BOCK UL-HGX24e CO2 LT Operating Manual

Foreword
Risk of accidents.
Refrigerating compressors are pressurized machines and, as such, call for heightened caution
and care in handling.
Improper assembly and use of the compressor can result in serious or fatal injury!
• To avoid serious injury or death, observe all safety instructions contained in these
instructions before assembly and before using the compressor! This will avoid
misunderstandings and prevent serious or fatal injury and damage!
• Never use the product improperly but only as recommended by this manual!
• Observe all product safety labels!
• Refer to local building codes for installation requirements!
CO applications require a completely new kind of system and control. They are not a general
2
solution for the substitution of F-gases. Therefore, we expressly point out that all information
in these assembly instructions has been provided according to our current level of knowledge
and may change due to further development.
Legal claims based on the correctness of the information cannot be made at any time and are
hereby expressly excluded.
D
Unauthorized changes and modifications to the product not covered by this manual are prohibited and
US
will void the warranty!
This instruction manual is a mandatory part of the product. It must be available to the personnel who
operate and maintain this product. It must be passed onto the end customer along with the unit in
which the compressor is installed.
This document is subject to the copyright of Bock GmbH, Germany. The information provided in this
manual is subject to change and improvements without notice.
Contents
1 Safety............................................................................................................................. 4
1.1 Identification of safety instructions....................................................................................... 4
1.2 Qualifications required of personnel...................................................................................... 4
1.3 Safety instructions................................................................................................................. 5
1.4 Intended use.......................................................................................................................... 5
2 Product description....................................................................................................... 6
2.1 Short description................................................................................................................... 6
2.2 Name plate............................................................................................................................ 7
2.3 Type key................................................................................................................................. 7
2 | AQ450435396289en-US0201
© Danfoss | Climate Solutions | 2023.07
Page