Typical Lens Adjustment Procedure - Miller Ultra HDV Owner's Manual

4-8.

Typical Lens Adjustment Procedure

OM-288717 Page 14
�
Lens assembly displays
prior settings
turned On. Retained set-
tings are not shown in
example.
�
In the Grind mode the
lens is a fixed shade No.
3. No lens adjustments
are possible.
Adjusting Lens Assembly
� Turn lens On. Display
screen appears.
� Select mode (Weld, Cut,
Grind, X-Mode).
� Select shade by pressing
Light (-) and Dark (+)
buttons.
� Select Delay by pressing
Fast (-) and Slow (+)
buttons.
� Select
Sensitivity
pressing Down (-) and Up
(+) Buttons.
� Begin work.
when
by