Table of Contents
Advertisement
4-4.
Mode Control Settings
1
1 Mode (On/Off) Button
2 Grind Mode Button
Press Mode button to select the mode ap-
propriate for the work activity:
Weld Mode- Used for most welding applica-
tions. In this mode the lens turns on when it
optically senses a welding arc. Adjust
shade, sensitivity, and delay settings as
needed.
Cut Mode- Used for cutting applications. In
this mode the lens turns on when it optically
senses a cutting arc. Adjust shade, sensitiv-
ity, and delay settings as needed.
OM-288717 Page 10
2
X-Mode - Used for outdoor or low current
welding applications. In this mode the lens
turns on when it senses weld current. Adjust
shade, sensitivity, and delay settings as
needed.
Grind Mode- Used for metal grinding appli-
cations. In this mode the shade is fixed
shade No. 3. No lens adjustments are
possible.
To use the Grind mode, press the Grind but-
ton once. Press Mode button to return to pri-
or setting.
Advertisement
Table of Contents
