KitchenAid KBSS361TSS Technical Education page 50

4. To remove the Infrared burner gas
valve:
a) Remove the control panel (see page
4-2 for the procedure).
b) Remove the thermocouple and gas line
connectors from the infrared burner gas
valve.
c) Remove the red and white wires from
the gas valve.
d) Unscrew the 8mm hex bolt from the
infrared burner valve and remove it
from the manifold.
Gas Line
Red & White Wires
Infrared Gas Valve
8mm Hex Bolt
REASSEMBLY NOTES:
• When you replace a gas valve, use an ap-
propriate thread sealant that is approved for
use with L.P. gas.
• Turn on the gas to the grill, and test all of
the connections by brushing on an approved
noncorrosive leak-detection solution. Bub-
bles will indicate a leak. Correct any leaks
found.
All manuals and user guides at all-guides.com
5.
Thermocouple
REASSEMBLY NOTES:
• When you replace a gas valve, use an ap-
• Turn on the gas to the grill, and test all of
4-10
To remove a burner gas valve:
a) Remove the control panel (see page
4-2 for the procedure).
b) Remove the red and white wires from
the gas valve.
c) Remove 8mm hex bolt from the gas
valve.
d) Remove the burner gas valve from the
manifold and remove the valve.
8mm Hex Bolt
propriate thread sealant that is approved for
use with L.P. gas.
the connections by brushing on an approved
noncorrosive leak-detection solution. Bub-
bles will indicate a leak. Correct any leaks
found.
Red & White Wires