Table of Contents
Advertisement
Manually lighting the side burner
1.
Do not lean over the grill.
2.
Remove the manual lighting extension (see
following illustration) and attach a match
to the split ring.
Freestanding grills - right-
hand cabinet door
3.
Strike the match to light it.
4.
Guide the match to the burner you wish
to light.
5.
Push in and turn the burner knob to LITE/
HI for the burner closest to the lit match.
The burner will light immediately. When
burner is lit, turn knob to desired setting.
6.
Repeat steps 3 through 6 for each burn-
er.
7.
Remove match and replace manual light-
ing extension inside the cabinet drawer.
IMPORTANT:
If burner does not light immediately, turn the
burner knob to OFF and wait 5 minutes before
relighting.
If any burners do not light after attempting to
light them manually, contact the KitchenAid
Customer eXperience Center. See the "As-
sistance or Service" section.
All manuals and user guides at all-guides.com
Built-in grills - right-hand side
ange
3-5
Using Your Rotisserie
C
A
B
A. Rotisserie motor
B. Spit rod
C. Rotisserie fork
D. Rotisserie burner
For best cooking results, do not use main grill
burners when using the rotisserie.
The rotisserie system is designed to cook food
from the rear using intense, searing infrared
heat.
NOTE: To avoid product damage when not
using the rotisserie, remove motor and store
indoors. Remove spit rod and forks. Store out
of reach of children.
To Use:
1.
Remove warming shelf.
2.
Mount rotisserie motor on the grill's mount-
ing bracket. Position it securely into support
bracket slots. Plug single-prong plug into
rotisserie motor.
A
A. Rotisserie motor
B. Single-prong power cord
3.
To load the spit rod, slide one of the rotis-
serie forks onto the spit rod with prongs
facing inward.
4.
Push spit rod through the center of the
food, then slide second rotisserie fork into
position.
5.
Center the food and rotisserie forks on spit
rod and tighten wing nuts on the rotisserie
D
B
Advertisement
Table of Contents
