Advertisement
Quick Links
UTG1000A Series Function Generator User Manual
1.2 General Safety Overview
This instrument strictly complies with the GB4793 safety requirements for electrical equipment and
EN61010-1/2 safety standard during design and manufacturing. It complies with the safety standards
for insulated voltage standard CAT II 300V and contamination level II.
Please read the following safety preventative measures:
To avoid electric shock and fire, please use the dedicated UNI-T power supply appointed to the local
region or country for this product.
This product is grounded through the power supply ground wire. To avoid electric shock, grounding
conductors must be connected to the ground. Please be sure that the product is properly grounded
before connecting to the input or output of the product.
To avoid personal injury and prevent damaging the product, only trained personnel can perform the
maintenance program.
To avoid fire or electric shock, please notice rated operating range and product marks. Do not use the
product outside the rated range.
Please check the accessories for any mechanical damage before usage.
Only use accessories that came with this product.
Please do not put metal objects into the input and output terminals of this product.
Do not operate the product if you suspect it is faulty, and please contact UNI-T authorized service
personnel for inspection.
Please do not operate the product when the instrument box opens.
Please do not operate the product in humid conditions.
Please keep the product surface clean and dry.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
9
Advertisement
Related Manuals for UNI-T UTG1000A Series
Summary of Contents for UNI-T UTG1000A Series
- Page 1 CAT II 300V and contamination level II. Please read the following safety preventative measures: To avoid electric shock and fire, please use the dedicated UNI-T power supply appointed to the local region or country for this product.
-
Page 2: Chapter 2 Introduction
· Supports sweep output · Easy-to-use multifunctional knob and number keyboard 2.2 Panels and Buttons 2.2.1 Front Panel UTG1000A series provides users with a simple, intuitive, and easy to operate front panel. The front panel is shown in figure 2-1:... - Page 3 UTG1000A Series Function Generator User Manual 11. Number Buttons 12.Menu Button 13.Function Menu Softkeys Multifunctional Knob and Button 1.Display 9.Directional Buttons 2.On/Off Button 8.CH Control/ Output Terminal Synchronous 4. Auxiliary Modulation/ 3.Menu 5.Manual Output Function and Frequency Operation Trigger Terminal...
- Page 4 UTG1000A Series Function Generator User Manual 4. Auxiliary Function and System Settings Button This button includes 3 function labels: Channel settings, frequency meter, and system. A highlighted label (the midpoint of the label is gray and font is pure white) has a corresponding sub label at the bottom of the display.
- Page 5 UTG1000A Series Function Generator User Manual The rear panel is shown in figure 2-2: Figure 2-2 1. USB Interface PC software is connected through this USB interface. 2. Heat Dissipation Holes To ensure this instrument dissipate heat well, please do not block these holes.
- Page 6 UTG1000A Series Function Generator User Manual Function interface is shown in figure 2-3: Channel Information Waveform Parameter List Softkey Labels Softkey Labels Figure 2-3 Detailed Description: ² Channel information: 1) “ON/OFF” on the left is channel open information. 2) There is a “Limit” logo indicates output range limit where white is valid and grey is invalid.