General Safety Overview - UNI-T UTG1000 Series User Manual

1.2 General Safety Overview

This instrument strictly complies with the GB4793 safety requirements for electrical equipment and EN61010-1/2
safety standard during design and manufacturing. It complies with the safety standards for insulated voltage
standard CAT II 300V and contamination level II.
Please read the following safety preventative measures:
To avoid electric shock and fire, please use the dedicated UNI-T power supply appointed to the local region or
country for this product.
This product is grounded through the power supply ground wire. To avoid electric shock, grounding conductors
must be connected to the ground. Please be sure that the product is properly grounded before connecting to the
input or output of the product.
To avoid personal injury and prevent damaging the product, only trained personnel can perform the maintenance
program.
To avoid fire or electric shock, please notice rated operating range and product marks. Do not use the product
outside the rated range.
Please check the accessories for any mechanical damage before usage.
Only use accessories that came with this product.
Please do not put metal objects into the input and output terminals of this product.
Do not operate the product if you suspect it is faulty, and please contact UNI-T authorized service personnel for
inspection.
Please do not operate the product when the instrument box opens.
Please do not operate the product in humid conditions.
Please keep the product surface clean and dry.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment
may be impaired.
UTG1000A Series 9