Pad And Trigger Settings; Selecting The Pad Type (Trigger Type) - Roland V-Drums TD-3 Owner's Manual

Pad and Trigger Settings

You can make more advanced settings for the pads.
The trigger parameters (except the Xtalk Cancel) are automatically set to the most efficient values for
each pad when you select the trigger type. Make settings for the parameters as needed.
The following is a list of the trigger parameters.
Parameter
Trigger Type
Pad Sensitivity
Threshold
Velocity Curve
Scan Time
Retrigger Cancel
Crosstalk Cancel
Mask Time
Rim Sensitivity
Rim Gain

Selecting the Pad Type (Trigger Type)

To be sure the TD-3 accurately receives signals sent from the pads, select the trigger type (the type of
pads being used).
Set each trigger input as described below.
Settings optimized for the TD-3Kit are provided in factory settings on the TD-3.
What is the Trigger Type?
A trigger type is a group of trigger settings with values optimally adjusted for a particular
pad. When you select a trigger type for a connected pad, each of the parameters is set to the
most appropriate values for that pad, allowing you to play it without encountering problems
with the settings. Only when factors unrelated to the selection of the proper trigger type
prevent you from getting good results in performance should you fine-tune the individual
parameters for the pad you are using.
7
50
Display
1 6 3
Page
p. 50
p. 52 (p. 40)
p. 53
p. 54
p. 55
p. 56
p. 57 (p. 41)
p. 58
p. 59
p. 59