Selecting Sounds [Inst] - Roland V-Drums TD-3 Owner's Manual

Creating Your Own Drum Kit

Selecting Sounds [INST]

How to assign instruments (sounds) to individual pads or pedals.
When using rim/edge-capable pads, select the sounds separately by hitting either the head (bow if a
Cymbal pad) or rim (edge if a Cymbal pad).
fig.01-004
1.
Press [INST].
[INST] flashes.
2.
Hit the pad you wish to set.
The trigger indicator for the struck pad lights, and the instrument number appears.
When the rim (edge) is struck, the rim indicator lights up.
3.
Press [+] or [-] to select the instrument.
When holding down [+] and pressing [-] values increase rapidly.
When holding down [-] and pressing [+] values decrease rapidly.
4. Repeat Steps 2 and 3 to make the settings for other pads or pedals.
5.
When you're finished, press [DRUM KIT]; the [INST] light goes off.
24
To see the available instruments, refer to "Drum Instrument List" (p. 69).
1
Do not turn off the power without the [INST] light having gone out. Otherwise you will lose
the changes you have just made.
3