Roland V-Drums TD-3 Owner's Manual page 61

Playing an External MIDI Device from
Pads Connected to the TD-3
Set the MIDI note numbers (same as key numbers on a
keyboard) that will be transmitted by the TD-3 pads.
Match this to the note number of the sound that you wish
to play on the external sound module or sampler.
When Setting Multiple Pads to the Same Note
Number
If overlapping note numbers are received from an
external MIDI device playing the TD-3, priority is given
to the instruments assigned in the following order.
1. KICK
2. SNARE
3. TOM 1
4. TOM 2
5. TOM 3
6. HI-HAT
7. CRASH 1
8. CRASH 2
9. RIDE
If note numbers for the head and rim are duplicated, only
the head instrument is played.
Example:
Note Number "38 (D 2)" is set for the head and rim of
Trigger Input SNARE and the head of Trigger Input
TOM1. In this case, when Note Number 38 (D 2) is
received, the instrument assigned to the head of Trigger
Input SNARE is played.
Drum Kit Note Numbers
fig.InitNote
Note No.
18
19
20
21
22 CLOSED HI-HAT (Edge)
23
C1 24
25
26 OPEN HI-HAT (Edge)
27
28
29
30
31
32
33
34
35
KICK
C2 36
37
38 SNARE (Head)
39
40
SNARE (Rim)
TOM 3
41
42 CLOSED HI-HAT (Bow)
43
44 PEDAL HI-HAT
45 TOM 2
46 OPEN HI-HAT (Bow)
47
TOM 1
C3 48
49 CRASH 1 (Bow)
50
51 RIDE (Bow)
52
CRASH 2 (Edge)
RIDE (Edge)
53
54
55 CRASH 1 (Edge)
56
57 CRASH 2 (Bow)
58
59
C4 60
* When a note number received is assigned to a pad, the
corresponding trigger indicator then lights up. (You cannot
check the timing in Coach mode.)
MIDI Settings
61