Rear Panel; Side Panel - Roland V-Drums TD-3 Owner's Manual

Panel Descriptions

Rear Panel

fig.rear
13. VOLUME Knob
Adjusts the volume of the TD-3 in both the headphones and
various output jacks.
14. OUTPUT Jacks (L (MONO), R)
For connecting to your amp or audio system. For monaural
output use the L/MONO jack (p. 13).
15. TRIGGER INPUT Jacks
For connecting pads, cymbals, and kick triggers (Optional or
those included with the kit) (p. 12). For more detailed
information on each trigger input, refer to Trigger Inputs and
the Pads You Can Use (p. 44).

Side Panel

fig.side
20. Security Slot (
http://www.kensington.com/
21. MIDI Connectors (IN, OUT)
IN: For a MIDI source (sequencer, keyboard, or other MIDI
device) to play sounds in the TD-3, or to load data from a
MIDI sequencer.
OUT: When using the TD-3/pads to play sounds in an
external MIDI sound module, or when saving the TD-3's data
to a MIDI sequencer.
(p. 60)
10
13 14
19 18
20
)
15
17 16
16. HH CTRL (Hi-Hat Control) Jack
Connect a hi-hat control pedal optional FD-7/FD-6; or FD-8
included with the TD-3Kit. (p. 12)
17. MIX IN Jack
For connecting CD, MD, cassette player, or other audio source
(p. 34). Sound input to this jack will be output from the
OUTPUT jacks and the PHONES jack.
18. AC Adaptor Jack
Connect the supplied AC adaptor to this jack (p. 13).
19. POWER Switch
Turns the power on/off (p. 14).
21 22
22. PHONES Jack
A pair of stereo headphones can be connected to this jack (p.
13). Connecting the headphones will not mute the output from
the output jacks.