Option Card Installation - Delta VFD-ED Series User Manual

Chapter 7 Option Cards | VFD-ED
Select the applicable option cards for your drive or contact your local distributor for suggestions.

To prevent damage to the motor drive during installation, remove the digital keypad and the cover

before wiring. Refer to the following instructions.
Note that the option cards do not support hot swapping. Turn off the drive power before installing or

removing the option cards.

7-1 Option Card Installation

7-1-1 Detach and Attach the Top Cover
Frame B, C and D
Step 1: Loosen the four screws
Step 2: Remove the top cover
Step 3: Attach the top cover, and then
tighten the four screws using
torque force 15 kgf-cm.
Figure 7-1
Figure 7-2
Figure 7-3
7-2