JETWAY For Socket 370 User Manual page 30

The items in Standard CMOS Setup Menu are divided into several categories. Each
category includes no, one or more than one setup items. Use the arrow keys to
highlight the item and then use the <PgUp> or <PgDn> keys to select the value you
want in each item.
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
> IDE Primary Master
> IDE Primary Slave
> IDE Secondary Master
> IDE Secondary Slave
Drive A
Drive B
Video
Halt On
Base Memory
Extended Memory
Total Memory
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Date
The date format is <day><month><date><year>.
Day Day of the week, from Sun to Sat, determined by BIOS. Read-only.
Month The month from Jan. through Dec.
Date The date from 1 to 31 can be keyed by numeric function keys.
Year The year depends on the year of the BIOS.
Time
The time format is <hour><minute><second>.
Primary Master/Primary Slave
Secondary Master/Secondary Slave
Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the
specifications of your drive must match with the drive table. The hard disk will not
work properly if you enter improper information for this category. If your hard disk
drive type is not matched or listed, you can use Manual to define your own drive type
manually.
If you select Manual, related information is asked to be entered to the following items.
Enter the information directly from the keyboard. This information should be provided
in the documentation from your hard disk vendor or the system manufacturer.
If the controller of HDD interface is SCSI, the selection shall be "None".
If the controller of HDD interface is CD-ROM, the selection shall be "None"
Access Mode The settings are Auto Normal, Large, and LBA.
Cylinder number of cylinders
Standard CMOS Features
Wed, Jul, 26 2000
17 : 35 : 22
Press Enter None
Press Enter None
Press Enter None
Press Enter None
1.44M, 3.25 in.
None
EGA/VGA
All,But Keyboard
640K
56320K
57344K
F6:Optimized Defaults
27
Item Help
Menu Level >
Change the day, month,
year and century
F1:General Help
F7:Standard Defaults