Healthstream HS6.0B User Manual page 6

L
FIGURE_3 ASSEMBLY FOR CENTRAL
SUPPORT TUBE
STEP 1.TAKE OFF THE BOLT(A5),
WASHER(L4),
FORM THE MAIN FRAME(A)
BEFORE ASSEMBLY.
STEP 3.CONNECT THE SENSOR
WIRE(A7) AND THE
COMPUTER CABLE(L3).
If you have any questions , please contact The Fitness Generation, +61 (03) 9765 9999.
L3
M
A7
A5
L4
5
Free call number 1300 796 636
www. healthstreamfitness.com.au
L4
STEP 2.PUT THE UPPER CENTRAL TUBE
(L) THROUGH DECORATION
COVER(M) FIRST AND AFTER
THE CABLE CONNECTED WELL
POSITION THE COVER(M) UNTILL
THE BUTTON.
STEP 4.ASSEMBLE SUPPORT TUBE(L) WITH
THE MAIN FRAME(A) BY BOLTS(A5),
WASHERS(A4) AND WASHERS(L4).
ATTENTION:TAKE CARE WHEN PUSHING
THE TUBES TOGETHER THAT THE CABLES
AND WIRES ARE NOT PINCHED.