Control Board - Pit Boss 4 Series Manual

A
E
A Power Button
Press once to turn on. Press and hold for three
seconds to turn off. Button will glow blue if unit is
connected to a power source.
B Function Button
Quick press to change the temperature units of
the Controller from Fahrenheit (ºF) to Celsius (ºC).
Press and hold this button to initiate priming the
auger, resulting in an extra feed of pellets to the
burn pot. Release to stop priming.
C Controller Knob
Push once to adjust and set the grill temperature.
Press and hold for three seconds to adjust and set
the programmable meat probe temperature.
D Meat Probe Connection Ports
Plug-in the adapter end of a meat probe to a
connection port. The readout will appear on the
display screen for the corresponding meat probe.
E Programmable Meat Probe
Connection Port
Same as regular meat probe ports, but this port is
programmable on the Control Board.
WWW.PITBOSS-GRILLS.COM

CONTROL BOARD

P1C P2 P3
F/C
B
C
P1C P2 P3
D
F
G Programmable Meat Probe Readout
H Meat Probe Readouts
I
J
G
P1C
F
Temperature Readout
Displays the Actual temperature from inside
the smoker. Readout is taken by the grill probe
(sensor). Adjusting the Controller Knob will
display the desired target temperature.
P1C
Displays the temperature reading of the program-
mable meat probe connected.
Displays the temperature reading of the meat
probe (or probes) that are connected. The readout
corresponds with the plug-in connection port
selected.
Fire Intensity Meter
Displays the Actual temperature intensity of the
fire in the burn pot, changing from blue to red.
The color also changes when the desired target
temperature is adjusted.
Operation Icons
A solid icon is visible when a component is in
operation. When an icon is flashing, an error has
occurred. See Troubleshooting for assistance.
7
H
P2 P3
I
J
F/C
P2 P3
HAVE A
QUESTION?
Check out some
common FAQs online
or Live Chat with
Customer Care.
PIT BOSS® GRILLS