TS54TDR PRO Test Set
Users Guide
Accessories
To order accessories, contact your local Fluke Networks
distributor.
Belt clip
Test leads with piercing-pin clips
Test leads with a 346A plug for the central office
Test leads with angled bed-of-nails (ABN) and piercing-pin clips
Test leads with alligator clips
Test leads with an RJ11 plug, angled bed-of-nails (ABN), and piercing-pin clips
Test leads with a 4 mm banana plug and alligator clips
Headset
Hanger kit (magnetic and clip-on hangers for the test set)
* When you use these test leads, the TDR accuracy specifications do not apply.
Specifications
Electrical
Current Range
10 mA to 100 mA
(Off-Hook)
DC Resistance
150 Ω nominal
Off-Hook
On-Hook
>3 MΩ
AC Impedance
600 Ω nominal; 300 Hz to
Off-Hook
3400 Hz
On-Hook
>120 kΩ; 300 Hz to 3400 Hz
Headset
32 Ω
impedance
30
Description*
2
Rotary Dial Output
Pulsing Rate
Break/Make Ratio
Interdigit Interval
Resistance During
Break
DTMF Output
Tone Frequency
Error
Tone Level
High versus Low
Tone Difference
Fluke Networks Model
Number
BELTCLIP-TS
TESTLEAD-PIERC-PIN
TEST-LEAD-CO-346A
TEST-LEAD-ABN-PPIN
TEST-LEAD-ALIG-CLP
TESTLEAD-ABNPPRJ11
TEST-LEAD-BANA-CLP
HEADSET-TS
TEST-SET-HANGER-TS
10 pps ±1 pps
60/40
>300 ms
>100 kΩ
±1.5 % maximum
-3 dBm combined (typical)
2 dB ± 2 dB