Lexmark MX826 User Manual page 143

Understanding the printer menus
Menu item
WEP Authentication Mode
Auto*
Open
Shared
Set WEP Key
WPA2/WPA Personal
AES
Set Pre‑Shared Key
WPA2-Personal
AES
802.1x Encryption Mode
WPA+
WPA2*
IPv4
Enable DHCP
On*
Off
Set Static IP Address
IP Address
Netmask
Gateway
IPv6
Enable IPv6
On*
Off
Enable DHCPv6
On
Off*
Stateless Address Autoconfiguration
On*
Off
DNS Server Address
Manually Assigned IPv6 Address
Manually Assigned IPv6 Router
Address Prefix
All IPv6 Addresses
All IPv6 Router Addresses
Description
Set the type of Wireless Encryption Protocol (WEP) for the printer.
Note: This menu item appears only when the Wireless Security
Mode is set to WEP.
Specify a WEP password for secure Wi‑Fi connection.
Enable Wi‑Fi security through Wi-Fi Protected Access (WPA).
Note: This menu item appears only when the Wireless Security
Mode is set to WPA2/WPA-Personal.
Set the password for secure Wi‑Fi connection.
Enable Wi‑Fi security through WPA2.
Note: This menu item appears only when the Wireless Security
Mode is set to WPA2-Personal.
Enable Wi‑Fi security through 802.1x standard.
Notes:
•
This menu item appears only when the Wireless Security Mode
is set to 802.1x - RADIUS.
•
802.1x - RADIUS can be configured only from the Embedded
Web Server.
Enable and configure IPv4 settings in the printer.
Enable and configure IPv6 settings in the printer.
143