Lexmark MX826 User Manual page 85

Understanding the printer menus
Menu item
E‑mail Alerts Setup
E‑mail Setup
Primary SMTP Gateway
Primary SMTP Gateway Port (25*)
Secondary SMTP Gateway
Secondary SMTP Gateway Port (25*)
SMTP Timeout (30 seconds*)
Reply Address
Always use SMTP default Reply
Address(Off*)
Use SSL/TLS(Disabled*)
Require Trusted Certificate(On*)
SMTP Server Authentication(No
authentication required*)
Device‑Initiated E‑mail(None*)
User‑Initiated E‑mail(None*)
Use Active Directory Device
Credentials(Off*)
Device Userid
Device Password
Kerberos 5 REALM
NTLM Domain
Disable "SMTP server not set up" (Off*)
E‑mail Alerts Setup
Setup E-mail Lists and Alerts
E‑mail List 1
E‑mail List 2
E-mail Events
Error Prevention
ADF Multifeed Sensor
Off
On*
Error Prevention
Jam Assist
Off
On*
Error Prevention
Auto Continue
Off
On* (5 seconds)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Configure the e‑mail settings of the printer.
Specify the e‑mail addresses and enable the e‑mail alert
events.
Note: This menu item appears only in the Embedded Web
Server.
Detect when the ADF picks more than one sheet of media at
once.
Set the printer to flush blank pages or pages with partial prints
automatically after a jammed page has been cleared.
Let the printer continue processing or printing a job
automatically after clearing certain printer conditions that
require user intervention.
85