Lexmark MX826 User Manual page 151

Understanding the printer menus
Menu item
Retries for HTTP/FTP Requests
1–299 (3*)
Note: An asterisk (*) next to a value indicates the factory default setting.
ThinPrint
Menu item
Enable ThinPrint
Off*
On
Port Number
4000–4999 (4000*)
Bandwidth (bits/sec)
100–1000000 (0*)
Packet Size (kbytes)
0–64000 (0*)
Note: An asterisk (*) next to a value indicates the factory default setting.
USB
Menu item Description
PCL SmartSwitch Set the printer to switch to PCL emulation when a print job received through a USB port requires
it, regardless of the default printer language.
Off
On* Note: When this setting is disabled, the printer does not examine incoming data and uses the
default printer language specified in the Setup menu.
PS SmartSwitch Set the printer to switch to PostScript emulation when a print job received through a USB port
requires it, regardless of the default printer language.
Off
On* Note: When this setting is disabled, the printer does not examine incoming data and uses the
default printer language specified in the Setup menu.
Job Buffering Temporarily store jobs on the hard disk before printing.
Off*
Note: This menu item appears only when a hard disk is installed.
On
Mac Binary PS Set the printer to process Macintosh binary PostScript print jobs.
Auto*
Notes:
On
•
Off
•
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the number of retries to connect to the HTTP/FTP server.
Description
Print using ThinPrint.
Set the port number for the ThinPrint server.
Set the speed to transmit data in a ThinPrint environment.
Set the packet size for data transmission.
Auto processes print jobs from computers using either Windows or Macintosh operating
systems.
Off filters PostScript print jobs using the standard protocol.
151