CONTENT Air dehumidification........................3 Precautions..........................4 Dehumidifier description......................5 Location and functions.......................6 Design............................7 Control panel..........................8 Water tank and continuous drainage..................9 Specifications...........................10 Support and warranty.......................11 www.danvex.fi...
USE OF DANVEX AIR DEHUMIDIFIER Despite of windows and doors insulation quality, damp and moisture can penetrate even through thick concrete walls. It can take 1-2 months for the water used for construction (concrete works, whitewashing, plasterworks etc.) to dry out.
12. If the power cord is damaged it should be replaced by the manufacturer, service center or similar qualified specialists to avoid danger. 13. It is prohibited to use the unit in the locations where chemical substances are used. 14.Before cleaning the unit should be switched off. www.danvex.fi...
The unit complies with the fundamental safety and health requirements of the existing EU regulations. The unit is easy and safe to operate. www.danvex.fi...
The heat is extracted at the cold evaporator. The air is cooled to below the dew point. The water vapor contained in the room air deposits as condensate or frost on the evaporator fins. www.danvex.fi...
DESIGN (1) Control panel (2) Air outlet (3) Handles (4) Front panel (5) Air intake (filter) (6) Drain hole (7) Condensate tank www.danvex.fi...
Page 9
(60% - position 4). Switching off the unit 1. Turn the humidity regulator to OFF position. 2. If the dehumidifier is not used for a long period of time the power plug should be disconnected from the mains socket. www.danvex.fi...
If you want to use this function please pull the water tank and connect a hose (option) to the drain connection. Filter cleaning 1. Remove the rear cover-filter. 2. It is required to remove the filter every two weeks and wash it with warm water, below 40 °C www.danvex.fi...
SPECIFICATION Model DEH-400p DEH-1000p Characteristics Power supply 230V~50HZ Consumed power 700W 1350W Operating current 3.2 A 5.3A NET weight 19.5 kg 24.5 kg Moisture removal at - (30°С / 80%) 40 l/day 80 l/day Air consumption 420m3/hour 450m3/hour Dimensions (HхDхW) 630 mm х...
The warranty does not cover wearable parts such as filters. The warranty covers the defects in workmanship and materials. During the warranty period DanVex repairs and replaces the part having a defect of material or an manufacturing error. DanVex completely fulfills its warranty obligations when it supplies the Customer a repaired or a spare part.
Need help?
Do you have a question about the DEH-400P and is the answer not in the manual?
Questions and answers