Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for DanVex DEH-1600i
Summary of Contents for DanVex DEH-1600i
- Page 1 DanVex DEH-1600i DanVex DEH-1900i Dehumidifiers Operation manual...
- Page 2 www.danvex.fi...
- Page 3 Attention!!! These units cannot be used for air cooling!!! Use of DanVex dehumidifier · Despite of windows and doors insulation quality, damp and moisture can penetrate even through thick concrete walls.
- Page 4 The ambient air is a gas mixture that always contains a certain amount of water in the form of water vapor. The maximum water vapor content in the air (moisture content of the saturated air) depends on its temperature and pressure. www.danvex.fi...
- Page 5 A misted window glass in winter or a misted bottle with a cold drink are common examples of condensing. The higher the relative air humidity the higher is the dew-point temperature, and thus it is easier to fall below the dew-point temperature. www.danvex.fi...
- Page 6 Vice versa, the energy is released when gas turns into liquid, such energy is called heat of condensation. The heat generated at condensation and evaporation and is identical. www.danvex.fi...
- Page 7 It is prohibited to use the unit for purposes other than intended or not specified in this operations instructions. In case the requirements are not observed our company disclaims any liability and out warranty becomes null and void. Only authorized personnel is permitted to perform works on cooling and electrical system! www.danvex.fi...
- Page 8 Heat is extracted at the cold evaporator. The air is cooled to below the dew point. The water vapor contained in the room air deposits as condensate or frost on the evaporator fins. www.danvex.fi...
- Page 9 The compressor switches on after 3 minutes only. We do not ensure the efficient operation of the unit if the room temperature is below 10 °C and if the relative humidity is below 40 %. www.danvex.fi...
- Page 10 Explode drawing: www.danvex.fi...
- Page 11 Press “Time” button before pressing this button, the time (minute) can be decreases. We do not ensure the efficient operation of the unit if the room temperature is below 10 °C and if the relative humidity is below 40 %. www.danvex.fi...
- Page 12 Direct sunlight or baking shall be avoided to prevent deformation. We do not ensure the efficient operation of the unit if the room temperature is below 10 °C and if the relative humidity is below 40 %. www.danvex.fi...
- Page 13 When the system detects that humidity sensor exceeds the limited range, the system enters mode of humidity sensor failure. Under this mode, LCD displays humidity failure code“E2”and the system enters continuous dehumidification. c. After temperature /humidity sensor failure is limited, the system works normally. www.danvex.fi...
- Page 14 Please connect the power cord firmly with the switch. If the power cord is loose, there may be risk of electric shock. Do not stop operation of dehumidifier by pulling out the power cord. Otherwise fire or electric shock accident may be caused. www.danvex.fi...
- Page 15 Controller error codes Failure Display Problem Temperature sensor failure Humidity sensor failure Phase sequence failure (for 380V power supply devices only) Water tank full (for the devices equipped water tank only) High temp./pressure Low pressure alarm (leakage may happen inside) www.danvex.fi...
- Page 16 Attachment. Electrical diagram www.danvex.fi...
- Page 17 The warranty does not cover wearable parts such as filters. The warranty covers the defects in workmanship and materials. During the warranty period DanVex repairs and replaces the part having a defect of material or an manufacturing error. DanVex completely fulfills its warranty obligations when it supplies the Customer a repaired or a spare part.
Need help?
Do you have a question about the DEH-1600i and is the answer not in the manual?
Questions and answers