Welbilt Frymaster McDonald's LOV BIGLA30 Gen II Series Installation, Operation And Maintenance Manual page 63

i. ready yes – Displays if the fryer was back to proper temperature before the cook
cycle was started.
NOTE – Above numbers are examples. They do not reflect actual conditions.
4. Press the  (2) button to return to INFO MODE changing to filter
stats prompt.
5. Press the  (2) button again to quit.
The computer displays OFF.
4.14.4 TPM (Total Polar Material) MODE – Only used when fryer is equipped with an
Oil Quality Sensor (OQS)
The TPM (Total Polar Material) mode displays the amount of total polar materials measured in the
oil by the oil quality sensor (if applicable).
1. Perform steps 1-3 on pages 4-34 through 4-35.
The computer displays TPM.
2. With the desired selection displayed, press the  (1 yes) button.
The computer displays current day on the left side and current date on the right side.
3. Use the and  buttons to scroll records; starting at the current day and
going back one week.
4. Press the INFO button to view TPM or to toggle between left and right
measurements on a split vat.
FULL VAT CONFIGURATION
a. TPM
SPLIT VAT CONFIGURATION
a. L TPM
b. R TPM
* NOTE: If the TPM value is not available the controller will display "---".
5. Press the  (2) button to return to INFO MODE changing to filter
stats prompt.
6. Press the  (2) button again to return to quit and previous state.
# day – Current TPM and day.*
# day – Current TPM and day on left vat. *
# day – Current TPM and day on right vat.*
4-38